Description
The Stumpjumper EVO S-Works pairs a 29-inch front wheel with a 27.5-inch rear wheel to offer all of the traction and handling benefits of a 29er, but with a smaller, more maneuverable rear wheel. It’s right at home at the bike park, and is a total blast to cut loose with on the trail.
- All the travel in the world is useless without the proper shock tuning and kinematics. Stumpjumper EVO has prioritized kinematic performance. Following more than 1,000 hours of field and suspension lab development, Specialized not only improved the pedaling performance of the Stumpjumper, but made it more capable, agile, and lively. It features increased anti-squat, so the suspension better resists pedal bob, and further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs.
- The S-Sizing geometry of the new Stumpjumper EVO is the progressive yet. Long, low, slack, short offset fork, steeper seat tube angle – these are requirements for modern progressive riding. The geometry on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front.
- Rider-First Engineered™ frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you’re a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you’ll experience the same ride traits – rail-sharp cornering and balanced front and rear stiffness – at the lightest-possible weight.
- Specialized introduced the SWAT™ door on the Stumpjumper in 2016, adding room IN your frame for those “oh sh**t” necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant. With the new Stumpjumper, there's increased the volume and a SWAT™ Bladder, giving you an extra 650ml of water storage – the same size as a small water bottle – hidden in your downtube.
SIZING:
S1: Suit 150-160cm rider height
S2: Suit 157-173cm rider height
S3: Suit 165-180cm rider height
S4: Suit 173-188cm rider height
S5: Suit 178-193cm rider height
S6: Suit 188-203cm rider height
BIKE SPECSFrame
FACT 11m carbon chassis and rear-end, asymmetrical design, 29/27.5 Trail Geometry, SWAT™ Door integration, head tube angle adjustment, horst pivot BB adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel. Rear shock: FOX FLOAT X Factory, Rx Trail Tune, EVOL Air sleeve, 2-position lever w/ LSC adjustment, S1:210x50mm, S2-S6:210x55mm.
Fork
FOX FLOAT 36 Factory, GRIP2 damper, 15x110mm, 44mm offset, S1: 150mm of travel, S2-S6: 160mm of travel
Seat Binder
Alloy, 38.6mm
SeatPost
RockShox Reverb AXS, 30.9, 1X remote, (S1:100mm, S2: 125mm, S3: 150mm, S4-S6: 170mm)
Stem
OneUp, 35.0
Saddle
Bridge, 155/143mm, Hollow Ti-rails
Handlebars
OneUp Carbon, riser bar, 5-degree upsweep, 8-degree backsweep, 35mm rise, 800mm, 35.0mm
Grips
Deity Lockjaw
Brakes
SRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm HS2
Shift Levers
SRAM Eagle AXS Rocker Paddle 12-speed
Derailleurs
Rear: SRAM XX1 Eagle AXS 12-speed
Cassette
SRAM XG-1299, 12-Speed, 10-52t
Chain
SRAM XX1 Eagle
Crankset
SRAM X01 Eagle, DUB, S1:165mm, S2-S5: 170mm, S6: 175mm
Bottom Bracket
SRAM DUB, BSA 73mm Wide, Threaded
Pedals
N/A
Rims
Roval Traverse SL 29F/27.5R, hookless carbon, 30mm inner width, 2Bliss Ready, hand-built, 28h
Hubs
Front: Roval Traverse SL, sealed cartridge bearings, 15mm thru-axle, 110mm spacing. Rear: Roval Traverse SL, DT Swiss Star Ratchet, 54t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing
Spokes
DT Competition Race
Tyres
Front: Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.3". Rear: Eliminator, GRID TRAIL casing, GRIPTON® T7 compound, 2Bliss Ready, S1-S2: 27.5x2.3, S3- S6: 29x2.3"
Inner Tubes
Standard, Presta valve
Weight
13.82kg
|
* Specifications are subject to change without notice