2024 Specialized Stumpjumper EVO Pro T-Type, Satin Dune White

Total control, unparalleled bump-eating suspension, and a fine-tunable geometry are hallmarks of the all-new Stumpjumper EVO Pro. It features top-spec Fox Factory 150mm travel suspension, Roval carbon wheelset, SRAM Wireless X0 Eagle drivetrain, Roval carbon handlebars and Bridge saddle with titanium rails for full gas trail performance with low weight and quality throughout.

• By pairing a 29-inch front wheel with a 27.5-inch rear wheel, the Stumpjumper EVO Expert offers all of the traction and handling benefits of a 29er, but with a smaller, more maneuverable rear wheel, it’s right at home at the bike park, and is a total blast to cut loose with on the trail.
• The new Stumpjumper EVO design prioritises kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, Specialized not only improved the pedaling performance of the Stumpjumper, but made it more capable, agile, and lively. It features increased anti-squat, so the suspension better resists pedal bob, and further improved bump performance on square-edge hits.
• The S-Sizing geometry of the new Stumpjumper EVO is the most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle – these are requirements for modern progressive riding. The geometry on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other.
• SWAT™ door adds room IN your frame for those “oh sh**t” necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant.

SIZING:

S1: Suit 150-160cm rider height
S2: Suit 157-173cm rider height
S3: Suit 165-180cm rider height
S4: Suit 173-188cm rider height
S5: Suit 178-193cm rider height
S6: Suit 188-203cm rider height

BIKE SPECS Frame FACT 11m carbon chassis and rear-end, asymmetrical design, 29/27.5 Trail Geometry, SWAT™ Door integration, head tube angle adjustment, horst pivot BB adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel. Rear Shock: FOX FLOAT X2 Factory, Rx Trail Tune, 2-position open/firm lever, HSC, LSC, HSR, and LSR adjustment. Fork FOX FLOAT 36 Factory, GRIP2 damper, 15x110mm, 44mm offset, S1: 150mm of travel, S2-S6: 160mm of travel Seat Binder Alloy, 38.6mm SeatPost Bike Yoke, Revive Max, 34.9 Stem Deity, 35.0mm Saddle Bridge, 155/143mm, Hollow Ti-rails Handlebars Roval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, 800mm, 35.0mm Grips Deity Lockjaw Brakes SRAM Code Silver Stealth, 4-piston caliper, hydraulic disc, 200mm HS2 Rotor Shift Levers SRAM AXS POD Controller 12 speed Derailleurs Rear: SRAM X0 Eagle Transmission Derailleur Cassette SRAM X0 Eagle Transmission Cassette, 12spd, 10-52T Chain SRAM X0 Eagle Transmission Flattop Chain, 12spd Crankset SRAM X0 Eagle, with Aluminum Guards, DUB, 32T chainring Bottom Bracket SRAM DUB, BSA 73mm Wide, Threaded Pedals N/A Rims Front: Roval Traverse 29 HD Carbon, 30mm internal width, 28h. Rear: Roval Traverse 27.5 HD Carbon, 30mm internal width, 32h Hubs Front: DT Swiss 350, 28h, 15x110. Rear: DT Swiss 350, 32h, 12x148 Spokes DT Swiss Competition Race Tyres Front: Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.3". Rear: Eliminator, GRID TRAIL casing, GRIPTON® T7 compound, 2Bliss Ready, 27.5 x 2.3" Inner Tubes Standard, Presta valve Weight 14.5kg

* Specifications are subject to change without notice